about

Engravvvver GCode Generator

The Engravvvver is a vvvv patch that reads a pixel image (.BMP / .JPG / .PNG / etc)
and converts it into a machine-readable GCode path for 2D raster engraving. Every GCode is saved incrementally within the folder of the source image.

You can

• set the laser power (min/max) from 0-255
• set the travel and feed rate
• set the scan resolution (pixel size in mm),
• define a cutout shape (quad/circle) as well as cutout speed and power
• see the graphical representation of the gcode line that is currently being written
• generate GCode files (yay!), these can be quite large!!

You can not

• achieve a higher feed rate than the max amount of gcode lines per second that your machine can receive
• send the gcode "on-the-fly" to a device (I use Universal GCode Sender 2.0 https://github.com/winder/Universal-G-Code-Sender)

download

Engravvvver 1.0.0.zip
27.03.16 [14:14 UTC] by LaserLars | 635 downloads